home *** CD-ROM | disk | FTP | other *** search
- Path: news.sinet.slb.com!usenet
- From: bar@canuck.englewood.geoquest.slb.com (Bernhard A. Rieckhoff)
- Newsgroups: comp.sys.amiga.hardware
- Subject: ECS A500 & Multiscan
- Date: 20 Feb 1996 15:57:05 GMT
- Organization: Schlumberger
- Message-ID: <4gcr0h$am6@ohnasn01.sinet.slb.com>
- NNTP-Posting-Host: 163.185.53.83
- X-Newsreader: knews 0.9.3
-
- Hello All,
-
- Recently while purchasing ADos 3.1 and some other upgrades I also
- bought a "super Denise" (I forget the number). The other day I took the
- NEC 3D monitor of my A1200 and stuck it on the A500 (rev 5B) with
- MegaChip and said super denise and was able to bring up
- double(PAL/NTSC), productivity and EuroXX screens. with no flicker
- etc. Cool. But, the higher frequency screens have a greenish cast and
- the last 3/8ths or so of an inch of the right hand side of the screen
- have a darker cast than the rest of the screen. Do I have hardware
- problem, or is this normal? Am I just overextending that old miggy ?
- I don't see any apparent problems in the usual Pal/ntsc or interlace
- modes.
-
- -- PLEASE REPLY TO: brieckhoff@houston.geoquest.slb.com
- Bernhard Rieckhoff Sr. Geophysicist, Schlumberger-GeoQuest
- Denver, CO USA Voice (303) 486-3204 FAX (303) 694-4690
- *Opinions expressed here are unlikely to reflect those of my employer*
-
-